Showing posts with label wood kiln. Show all posts
Showing posts with label wood kiln. Show all posts
Tuesday, April 17, 2012
Friday, January 21, 2011
Busy In Boiling Springs
Its cold in Pennsylvania.
And I just spent the last few days at Kurt's studio prepping and firing some collaborative work (collaborative? I know its definately a new concept in clay for me).
I started slip decorating my own pots last year around April and Kurt saw some pieces and asked if I would do some decorating on his pots. I said I would and so we set out to do this a few weeks before the new year. We fired in his wood salt kiln (the one that I posted pictures of from this last summer) for two and a half days. Candled with propane on Tuesday night into Wednesday morning and added some larger burners, as we started with his weed burner, and did turn ups over the lunch time hours. The real deal started around 4 in the afternoon. We had help and visitors through out the firing as Kurt's home and studio tend to be a very active place (people are always popping by to see what he is up to, to lend a hand, or just to share conversation). Apparently he also had a visit from the cranky neighbor lady from last time (remember her, she needs to find a hobby other than terrorizing Mr. Brantner and his pottery) who didn't have anything nice to say, she even went as far to say she wanted to have him fined! Which we all know is nonsense... Kurt fired the kiln solo from about 3am to 11am Thursday morning. It reached a temperature of cone 11 (about 2400 degrees F). We also set up the door with a port so hikidashi could be performed. Unfortunately I wasn't there to help but from what I heard Kurt pulled 4 pots out of the port.
We are unloading this Sunday, the 23rd of January and I will try to document then. We did get some folks to take pictures while they were there and Kurt had some video footage taken at the end. There is a small preliminary trailer that is about 1 minute 45 seconds (actual footage is over a half hour). It was filmed by Nate, a friend of Kurt's. This video will most likely be replaced by another one but for reference its pretty interesting.
*Edit
Well here is a new video by Nate of the unloading that happened the 23rd. Its a pretty good little film. Gives you an idea of what kinds of things came out and shows a little bit of Kurt and I in the flesh.
And I just spent the last few days at Kurt's studio prepping and firing some collaborative work (collaborative? I know its definately a new concept in clay for me).
I started slip decorating my own pots last year around April and Kurt saw some pieces and asked if I would do some decorating on his pots. I said I would and so we set out to do this a few weeks before the new year. We fired in his wood salt kiln (the one that I posted pictures of from this last summer) for two and a half days. Candled with propane on Tuesday night into Wednesday morning and added some larger burners, as we started with his weed burner, and did turn ups over the lunch time hours. The real deal started around 4 in the afternoon. We had help and visitors through out the firing as Kurt's home and studio tend to be a very active place (people are always popping by to see what he is up to, to lend a hand, or just to share conversation). Apparently he also had a visit from the cranky neighbor lady from last time (remember her, she needs to find a hobby other than terrorizing Mr. Brantner and his pottery) who didn't have anything nice to say, she even went as far to say she wanted to have him fined! Which we all know is nonsense... Kurt fired the kiln solo from about 3am to 11am Thursday morning. It reached a temperature of cone 11 (about 2400 degrees F). We also set up the door with a port so hikidashi could be performed. Unfortunately I wasn't there to help but from what I heard Kurt pulled 4 pots out of the port.
We are unloading this Sunday, the 23rd of January and I will try to document then. We did get some folks to take pictures while they were there and Kurt had some video footage taken at the end. There is a small preliminary trailer that is about 1 minute 45 seconds (actual footage is over a half hour). It was filmed by Nate, a friend of Kurt's. This video will most likely be replaced by another one but for reference its pretty interesting.
*Edit
Well here is a new video by Nate of the unloading that happened the 23rd. Its a pretty good little film. Gives you an idea of what kinds of things came out and shows a little bit of Kurt and I in the flesh.
Kurt Brantner Winter Sale Film from Cinemoxie on Vimeo.
Monday, December 20, 2010
Post Unloading Juniata's Anagama Thoughts
As I said before the images below were taken mainly by my dad over the course of a week-ish. He used a point-and-shoot digital camera so there are more than a few "motion action shots." Overall the firing was a complete success. There were very few "bad" pots but we did/ I did manage to stack the front of the kiln using only one brick to support two very heavy 32"x24" shelves. Needless to say there were some weight + heat-over-time happenings.
We did get the kiln to temperature and developed a solid holding pattern that allowed us to reach cone 13 (2400 F or 1310 C). We also had the front of the kiln open for just about the entire firing which let radiant heat from our front ember mass (coals that are used to maintain temp. in the firebox of the anagama) help to get our desired temperature in the back of the kiln.
For the record Jared and Nick came on shift as I was fading around 10am Monday morning and they stoked the middle and back of the kiln till a little after Simon Leach's Youtube video was shot at 3pm in the afternoon. The cones in the middle door section had cone 12 (2350 F) down and in the back Jared managed to flatten cone 13 (no easy task).
Our goal was to get it hot and melt the ash on our pots (as the firing before this one there were many crusty grey pots) and we did just that. Many beautiful things came out of this firing and I think everyone got at least one great piece. Expect to see examples of my pots as soon as I get my home photo set-up set up. Maybe I'll even post images of some of the other peoples work i.e. Nick, Jared, and my Dad. Who knows.
We did get the kiln to temperature and developed a solid holding pattern that allowed us to reach cone 13 (2400 F or 1310 C). We also had the front of the kiln open for just about the entire firing which let radiant heat from our front ember mass (coals that are used to maintain temp. in the firebox of the anagama) help to get our desired temperature in the back of the kiln.
For the record Jared and Nick came on shift as I was fading around 10am Monday morning and they stoked the middle and back of the kiln till a little after Simon Leach's Youtube video was shot at 3pm in the afternoon. The cones in the middle door section had cone 12 (2350 F) down and in the back Jared managed to flatten cone 13 (no easy task).
Our goal was to get it hot and melt the ash on our pots (as the firing before this one there were many crusty grey pots) and we did just that. Many beautiful things came out of this firing and I think everyone got at least one great piece. Expect to see examples of my pots as soon as I get my home photo set-up set up. Maybe I'll even post images of some of the other peoples work i.e. Nick, Jared, and my Dad. Who knows.
Saturday, October 2, 2010
Wood-Salt Firing in Boiling Springs with Kurt
Friend, colleague, and Juniata College student Nick Brown and I joined Kurt to fire his updraft woodkiln in August. It went quite well dis-spite a disgruntled and completely uninformed neighbor who just picked us to take all her environmental woes at about 9:00 am at around 2000 degrees. What a problem! People really need to learn about what they are fighting against before they raise their voice. If she knew what kind of footprint the wood we were burning actually was as opposed to the propane she forcefully suggested we use or the gas she uses to 'drive to her real job' over an hour everyday she would never have left her house to even think about doing anything but thanking us for enriching her town both in spirit and in culture. We went from stoking rather large pieces of slab wood to spending about 12 to 14 hours firing with nothing but 3 or 4 pieces of 9"x3"x1" hardwood and were able to continue to rise in temperature. It was insane. The pictures I promised will be uploaded shortly as there are many.
Saturday, March 13, 2010
Subscribe to:
Posts (Atom)
